Most Freesat and Freeview set top boxes do not have a UHF modulator built in. The Triax Tri-Link solves the issue of distributing Freesat or Freeview around the home, with the ability to view and control set top boxes on existing analogue and digital TV's with built in analogue tuners.
This Triax Tri-Link Kit comprises UHF modulator pre-selectable between TV channels 21 to 68. It has a TV aerial input with UHF loop through to enable the modulated signal and TV aerial to be combined. It is supplied with a couple of stick on IR remote control transmitters to afix to front of satellite receiver/s or DVD recorder etc. This combined enables you to view and remote control the devices from other room's.
There's even a remote eye included to enable you to remote control your set top box from say the bedroom.
Full circuit diagram supplied.
Connections:
RF output 1: F Socket (for connection to local TV - i.e. lounge if required)
RF output 2: F Socket (for connection to remote TV (i.e bedroom) or Triax DDU or distribution amplifier in loft. RF 2 carries the signal plus allows IR return for remote controlling the devices/s connected to the modulator.
IR Transmitter Jack: For connection of supplied stick on IR remote control transmitters (these are basically small circular LED diodes (12mm dia)
AV input: Scart Socket (Connection from output of Freesat or Freeview receiver, DVD player etc. Any AV device that needs to be modulated onto a UHF TV carrier.
AV output: Scart Socket (for connection to local TV if required)
RF input: F Socket (for connection from TV aerial if you require that to be combined with the modulated signal)
See list of related products below that may be useful in your installation. Please do not hesitate to contact us if you require any more information.
