Splitters Combiners Diplexers and Triplexers
Combiners, Diplexers Triplexers and Quadplexers are commonly used to couple TV Radio and or Satellite dish signals together so that they may be sent on only one coaxial cable to say the lounge. In here there would be a special outlet plate that separates the signals onto the appropriate socketry for connection to your equipment.
Examples of items shown below:
To combine a TV aerial signal with a DAB Radio aerial signal: Use the Fringe Masthead VHF-UHF Diplexer with DC Pass.
To combine a TV aerial signal with a satellite LNB signal: Use the Global DIP2-DC SAT IF-UHF/FM Diplexer.
To Combine a TV aerial signal with a satellite LNB signal, DAB Radio signal and FM radio signal: Use the Antiference UDF420DC Quadplexer.
For wiring diagrams of some of the above examples and others have a look at our project sheet under 'Information' or CLICK HERE.
Splitters
Splitters can be used for a number of projects. For instance if you live near a TV transmitter and have a strong aerial signal, you could use one of our F Splitters to split the aerial signal to two or more rooms. But remember these are passive units and do not amplify the signal.
For example a 2 way splitter will loose over a third of the aerial signal (in its internal circuit) and so on. So if your aerial signal is only just about strong enough, use a distribution amplifier to distribute the aerial signal to different rooms.
Anything you are now sure about do not hesitate to contact me: peterturk@aerialsuperstore.co.uk or Tel Mon-fri 10.00am-4.00pm
| | | | | | | | | | | | |  | Global DIP1 Internal Diplexer This Global DIP1 splitting diplexer is normally used indoors to separate the satellite and TV signals that are already combined on one cable. Use in conjuction with the external Global DIP2 DC Diplexer
£12.00 |
|  | Global DIP2-DC SAT IF-UHF/FM Diplexer Allows a satellite signal to be added to an existing TV aerial cable. Use in conjunction with either the indoor DIP1 internal diplexer or a diplexed TV and satelite socket/outlet plate to seperate the signals for connection to TV and satellite receiver £14.00 |
| | |
|