Lead Roof Entry Flashing KIT
Complete with: Flashing, Base, Clamp, Collar and mast Cap
A complete kit for securing a 2″ diameter (48-50mm) mast through tiled roofs. It allows a firm base fixing on a joist with a clamp on a rafter just before the mast exits the roof void. With a lead entry plate to ensure the installation remains weatherproof this is an ideal solution for those installations where the only method of reception is through the roof!
The kit comprises of: -
MAST BASE BRACKET
For securing masts on horizontal surfaces with two hexagon wood screws 8 x 45. The mast is kept at a distance from the floor by a stop thus ensuring that antenna cables can be fed out.
FIXING CLAMP
For securing masts with two hexagon wood screws on straight beams or on beams that slant to the left or right.
LEAD MAST ROOF ENTRY PLATE
Roof covering for roofs slanted at angles from 5 to 50 degrees. Zinc plated connect piece with lead plate. Size: 400 x 300mm. Zinc plated piece = 0.6mm thick, Lead Plate = 0.8 mm thick.
SEALING COLLAR/SEALING STRAP
Weatherproof, rain-tight covering for the mast roof entry plate. For mast Ø 48-50mm.
MAST CAP
Black plastic end piece for the top of the antenna mast. For mast Ø 48-50mm.
