MTI Monoblock LNB

MTI Monoblock LNB 13+19 Degrees Together

Designed to receive any two satellites with a 6 degree spacing e.g. Astra 19.2 and Hotbird 13. It features two universal LNBs with an in-built DiSEqC switch (DiSEqC 2.0/Tone Burst) so it has one F connector and requires a single cable to tune to the DiSEqC compatible receiver.

Supplied with universal fittings, it will fit any 78 -80cm dish with an F/D ratio of 0.6 with minimal need for LNB alignment. Ideal for use with our Triax range of TD satellite dishes.

Specification:

RF INPUT
Frequency Range Low Band: 10.7-11.70GHz
Frequency Range High Band: 11.7-12.75GHz

IF OUTPUT
Frequency Range Low Band: 950-1950MHz
Frequency Range High Band: 1100-2150MHz
Connector Type: 75 ohm Female Connector
F/D Ratio: 0.6

LOCAL OSCILLATOR
Frequency Low Band: 9.75GHz
Frequency High Band: 10.6GHz
Frequency Stability: +/- 1MHZ (Max.) @ Room Temp.

Image Rejection: 45dB (Min.)
Cross Polarisation: 28dB (Typical.)

POWER REQUIREMENTS
DC Current Consumption: 120mA (Typical.)
Operating Voltage Vertical: 11.5~14Vdc
Band Switching Low Band: 0 Hz
Band Switching High Band 22KHz +/- 4KHz

ENVIRONMENT
Operating temperature: -40degreeC ~ +60degreeC