Global LNB DiSEqC 2x1 Sat Switch
Enables two LNB’s to be connected to one cable feeding a satellite receiver which has built in DiSEqC LNB protocol.
Designed to be installed outside by the satellite dish or dishes.
Specification:
A two in, one out switch controlled by the DiSEqC protocol.
A typical application is the switching of 2 universal LNBs, where the receiver's 13/18V and 22KHz tone is used to control the LNB and DiSEqC controls the switch.
Both full and mini DiSEqC protocols are supported. The switch, in a screened metal box is enclosed in a rain proof plastic cover that protects the switch and the three connectors. This avoids the need for time consuming and expensive tape or boots.
Freq. Range: 700-2300MHz
Insertion Loss: 4dB +/- 1dB
Isolation: >25dB
